Pro-Twist · Drywall Screws
Self-Drilling Drywall Screws
Quote requiredPro-Twist® Self-Drilling Fine Thread Drywall Screws are designed for fast and long lasting installation of drywall to light gauge metal studs. The self-drilling point pierces the substrate easily and the well-defined fine threads provide a strong grip in light gauge steel framing members. A #2 Reduced Phillips Drive minimizes the risk of overdriving and the bugle head sits cleanly without damaging the drywall surface. Available in three coatings for various applications. Exterior coated for superior corrosion resistance. Phosphate coating speeds up the drive and provides a barrier between metal fastener and joint compound. Zinc plated for some corrosion resistance.
Application
Hidden Fasteners for Composite Decking | Pro-Twist
Head Type
Bugle Head
Thread Type
Fine Thread
Point Type
#2 Drill Point
Description, photography and documents as published by Pro-Twist. Their product page ↗
Part numbers
20 of 20. Every figure is Pro-Twist's published data.| Part # | Gauge | Length | Piece Count | Finish or Coating | |
|---|---|---|---|---|---|
| SD100 | #6 | 1 in. | 10000 | Phosphate Coated | |
| SD114 | #6 | 1-1/4 in. | 8000 | Phosphate Coated | |
| SD114PGP | #6 | 1-1/4 in. | 8000 | Exterior Coated | |
| SD118 | #6 | 1-1/8 in. | 10000 | Phosphate Coated | |
| SD158 | #6 | 1-5/8 in. | 5000 | Phosphate Coated | |
| SD158PGP | #6 | 1-5/8 in. | 5000 | Exterior Coated | |
| SD178 | #6 | 1-7/8 in. | 4000 | Phosphate Coated | |
| SD178PGP | #6 | 1-7/8 in. | 4000 | Exterior Coated | |
| SD238 | #8 | 2-3/8 in. | 3000 | Phosphate Coated | |
| SD258 | #8 | 2-5/8 in. | 2000 | Phosphate Coated | |
| SD300 | #8 | 3 in. | 2000 | Phosphate Coated | |
| SDZ100 | #6 | 1 in. | 10000 | Zinc Plated | |
| SDZ114 | #6 | 1-1/4 in. | 8000 | Zinc Plated | |
| SDZ118 | #6 | 1-1/8 in. | 10000 | Zinc Plated | |
| SDZ158 | #6 | 1-5/8 in. | 5000 | Zinc Plated | |
| SDZ178 | #6 | 1-7/8 in. | 4000 | Zinc Plated | |
| SDZ238 | #8 | 2-3/8 in. | 3000 | Zinc Plated | |
| SDZ258 | #8 | 2-5/8 in. | 2000 | Zinc Plated | |
| SDZ300 | #8 | 3 in. | 2000 | Zinc Plated | |
| SDZ400 | #8 | — | 2000 | Zinc Plated |
The same on every part number here
- Application
- Drywall to Metal Screws
- Head Type
- Bugle Head
- Drive Type
- #2 Reduced Phillips
- Point Type
- #2 Drill Point
- Thread Type
- Fine Thread
- Self-Drilling
- Yes
- Base Material
- High Carbon Steel
- Hand Drive
- Yes
- Collated
- No
- Packaging
- Carton
- Code Approvals
- ICC-ES Evaluation Listing ESL-1262
Details
Phosphate coated fine thread drywall screws for use with light gauge steel studs
Made from high carbon steel for strength and durability
For use in interior drywall applications
Bugle head for easy countersinking and strong hold
#2 Reduced Phillips Drive prevents over driving
Fine threads grip light gauge steel substrate and provide strong compressive hold
Phosphate coating for fast driving and some corrosion resistance
Self drilling point pierces through drywall and into light gauge metal studs easily
Documents
4 documents, served straight from Pro-Twist so you always get the current revision.
- ESL-1262Evaluation report · PDF ↗
- Pro-Twist Product CatalogProduct catalogue · PDF ↗
- Pro-Twist Fastener PosterLiterature · PDF ↗
- PrimeGuard PLUS® WarrantyWarranty · PDF ↗
Pro-Twist publishes these by line rather than by part number — one catalogue and one warranty cover the whole range. Anything above marked as an evaluation report is the listing this product is actually approved under.
Ask About This Product
Answered from Pro-Twist's own documents — the 4 sheets listed above — with the source and page behind every line.