walls.one
Log in

Engineering & Takeoff

Your Takeoff.
Your Engineer.
One Company.

Send us the plan set. Our AI takeoff service measures the new walls and ceilings and prices the material. Our engineers design and stamp the cold-formed steel. You request, ask and track all of it in the same place you order material.

Order a takeoffRequest engineering
per plan sheet
$10
states we stamp in
28
login for all of it
1
A laptop showing a Walls.one AI takeoff: a marked-up floor plan beside its material list and a ready quote

Why use our AI takeoff

A Priced Takeofffor $10 per Plan Sheet.

You upload the plans. We run them through our AI takeoff service, build the material list from the quantities and price it from our store. What comes back is a quote you can order from.

A hospital floor plan after a Walls.one AI takeoff: the new partitions are traced in colour by wall type and numbered

509LF of new partition

  • Non-rated 268'
  • Type S 110'
  • Type A 73'
  • Type B 49'
  • Type C 9'

Example · sheet A-201 · Level 1 partitions

509linear feet of new partition

Non-rated268'
Type S110'
Type A73'
Type B49'
Type C9'

Every new wall is measured and split by wall type, so the totals can be checked against your partition schedule before anything is priced.

Upload Plans

A-201 Level 1 Partitions.pdf

8 sheets · ready to send

How many plan sheets?

8

$80.00 total · $10 per plan sheet

The fee

You Know the Fee Before You Send.

Type in how many plan sheets you have and the form shows the fee: 8 sheets is $80. Give us your bid date and we know when you need it.

Material list

ClarkDietrich ProSTUD® EQ Drywall Stud14' · 3-5/8" (362S) · 20 ga EQ

392

ClarkDietrich ProTRAK® EQ Track14' · 3-5/8" (362T) · 20 ga EQ

182

Type X Drywall4' × 12' · 12,384 SF coverage

258

+ 6 more lines · priced from our store

The quote

Every Line Is a Part Number You Can Order.

Studs, track, board and screws, sized and counted. Open the quote in your cart, change what you want and order. We will try to beat any other quote on the same scope.

The same floor plan split in two: the demo plan tinted blue on the left, the new plan with its new walls traced in colour on the rightDemo planNew plan

Renovations

Only Have Demo and New Plans? We Compare Them.

No wall types tagged? We find the new walls by laying the demo plan against the new plan. It is less accurate, so use it for budgeting, not for buying. The form tells you that before you pay.

Why use us as your engineer

Cold-Formed SteelIs What We Do.

Stamped framing design and calculations for interior and exterior walls, load-bearing or not, plus full structural engineering services. Licensed in 28 states.

What we check

One stud of an exterior wall, under wind

WIND · 25 PSFΔ ≤ L/360= 0.40"150 PLF150 PLFSLIP TRACK · 3/4" GAP600S162-54 @ 16" O.C.BRIDGING @ 48" O.C.600T125-54 TRACK12'-0"One stud, checked for bending, deflection and the load its tracks carry.

What you receive

The stamped design and its calculations

SHEET S-1.1 · CALCULATIONSCold-formed steel framing designMEMBER SCHEDULEMARKMEMBERSPACINGHEIGHTW1600S162-5416" O.C.12'-0"W2600S162-4316" O.C.10'-0"W3362S162-3316" O.C.10'-0"H1(2) 600S162-54BOXED6'-0" R.O.W1 · EXTERIOR NON-LOAD-BEARING · WIND 25 PSFw = 25 PSF × 1.33 FT = 33.3 PLFM = wL²/8 = 600 FT-LBOKΔ = 5wL⁴/384EI ≤ L/360OKR = wL/2 = 200 LB PER STUD6"1-5/8"600S162-5454 MIL · 50 KSILICENSEDP.E.COLD-FORMEDSTEEL DESIGNPROJECTRIVERSIDE MEDICAL OFFICE BUILDINGSHEETS-1.1ISSUED FORSUBMITTAL

What we engineer

  • Interior non-load-bearing
  • Interior load-bearing
  • Exterior curtain wall
  • Exterior load-bearing
  • Shaft walls
  • Parapets
  • Soffits & canopies
  • CFS roof and floor joists

What you receive

  • Stamped CFS framing design
  • Full structural calculations
  • Framing plans and sections
  • Connection details
  • Deferred submittal package
  • Answers to RFIs and plan review comments
LICENSEDP.E.COLD-FORMEDSTEEL DESIGN28STATES WE STAMP IN

Licensed

Stamped in 28 States.

Pick your state on the request form and it tells you right away whether we can stamp it. Outside the 28, send it anyway: we add states regularly and can often partner with a local engineer of record.

  1. Takeoffmeasured from your plans
  2. Materialpriced from our store
  3. Shop drawingsevery panel drawn
  4. Engineeringdesigned and stamped
  5. Prefabbuilt in our shop

One company

The Design Comes With the Material List to Build It.

The company that engineers the wall also sells the studs and can prefabricate the panels. Nothing is re-drawn or re-counted between firms.

EN-202609-K7QFWaiting on you

Riverside Medical Office Building — Full CFS engineering

Engineer assigned · 6 files · Due Oct 02

  1. Intake
  2. In progress
  3. Waiting on you
  4. In review
  5. Delivered

The engineer askedWall type 7 on A-201 is not in the partition schedule. Is it framed the same as type 5?

Your portal

A Direct Line to the Engineer.

Every request becomes a project in your portal, with its status, its files and a message thread with the engineer. When we need an answer from you, it is flagged.

Wall panel shop drawings

Every Panel Drawn,Every Elevation Located.

A shop drawing of each wall panel, plus a generated floor plan that shows where each elevation lands. You send plans, we build the drawings, ready for our prefab shop or yours.

The panel

One sheet per wall panel

5'-4"4'-0"6'-8"16'-0"10'-0"R.O.4'-0" × 4'-0"BOXED HEADER16" O.C. TYP.APPROVEDFOR FABRICATIONMARKWP-14SETS ONLVL 2 · C–DSTUD 600S162-54TRACK 600T125-54SCALE 1/2"=1'-0"REV AWALL PANEL ELEVATIONViewed from the exterior

Where it goes

Every mark keyed to its elevation

GENERATED FLOOR PLAN · PANEL MARKS KEYED TO ELEVATIONSWP-09WP-10WP-11WP-12WP-13WP-14WP-15WP-16WP-17WP-18WP-19WP-20ELEVATION WP-14LEVEL 2 · 12 PANELS · ONE SHEET EACH
  • Member sizes, spacing and connection callouts
  • Openings, blocking and bracing located
  • Issued in PDF, with DWG on request
  • Panel weights and a material list per panel, if you want them
  • A setting sequence, if you want one
  • You review, we revise, then we release for fabrication

Side by side

What ChangesWhen You Send Us the Plans.

The plans are the same. The work on your side is not.

The takeoffDoing it yourselfScaled off the sheets by handWith Walls.oneRun through our AI takeoff service
What it costsDoing it yourselfEstimator hours on every bid, won or lostWith Walls.one$10 per plan sheet, on the screen before you send
What comes backDoing it yourselfQuantities in a spreadsheetWith Walls.oneA takeoff, a material list and a priced quote
Ordering itDoing it yourselfRe-typed into a supplier's quote requestWith Walls.oneOpens in your cart, priced from our store
The engineerDoing it yourselfA separate firm to find and briefWith Walls.oneOur cold-formed steel engineers, stamped in 28 states
Shop drawingsDoing it yourselfAnother firm, another set of plans to sendWith Walls.oneDrawn by the same company from the same plans
Keeping trackDoing it yourselfEmail threads and phone callsWith Walls.oneOne portal with status, files and a line to the engineer

How it runs

Five Steps From Your Plansto Stamped Drawings.

Steps one to three are the AI takeoff. Shop drawings and engineering are their own services, each quoted before any work starts.

  1. Step 1: Send the plans

    PDF, DWG, DXF, RVT or ZIP. Tell us your bid date and what to take off.

    AI takeoff · $10 per plan sheet

  2. Step 2: We run the takeoff

    New walls and ceilings measured, and split by wall type.

    AI takeoff

  3. Step 3: You get the list and the quote

    Real part numbers, priced from our store. Order from it when you win the job.

    AI takeoff

  4. Step 4: We draw the panels

    A shop drawing of every wall panel, keyed to a floor plan.

    Shop drawings · quoted per project

  5. Step 5: We engineer and stamp

    Cold-formed steel design and calculations, stamped in 28 states.

    Engineering · quoted per project

The three services

Three Services.Use One or All Three.

Each one is requested on its own form and tracked in your portal. Start with whichever your job needs.

AI based takeoff

Send Plans. Get a Takeoff, a Material List and a Quote.

$10 per plan sheet

  • New walls and ceilings quantified
  • Material list priced from our store
  • Demo-against-new comparison available
Order a takeoff

Wall panel shop drawings

Every Panel Drawn, Every Elevation Located.

Quoted per project

  • Panel-by-panel detail drawings
  • Generated floor plan with elevation keys
  • Ready for our prefab shop or yours
Request shop drawings

Full engineering services

Stamped Cold-Formed Steel Design in 28 States.

Quoted per project

  • Licensed in 28 states
  • Load-bearing and non-load-bearing
  • Full stamped calculations
Request engineering

Have Plans? Send Them to Us.

Start with a takeoff at $10 per plan sheet, or tell us what needs engineering and we will quote it.

Order a takeoffRequest engineering