ClarkDietrich · Custom Fabricated Clips & Connectors

Custom Fabricated Clips & Connectors

Quote required

Wide array of custom options

A diverse selection of specialized sizes and shapes are available. Prepunched holes and specialized slotting are also available. Simply submit your dimensioned drawings to one of our customer care representatives. The performance and installation of custom-made products is the sole responsibility of the design professional and engineer of record. Any customer ordering a custom-fabricated clip, connector or support shall indemnify, defend and hold harmless Clarkwestern Dietrich Building Systems LLC, ClarkDietrich Building Systems, and ClarkDietrich Engineering Services for any loss or damage arising in whole or in part. Contact ClarkDietrich Technical Services for help with creating product submittals for custom shapes.

Coating: G90 or CP60 Must be specified at the time of order placement.
Yield Strength: 50ksi or 33ksi Must be specified at the time of order placement.

Description, photography, tables and documents as published by ClarkDietrich. Their product page ↗

Sizes

ClarkDietrich publishes no product code for this one — it is made to the connection rather than ordered off a list. Send the desk the condition and we'll have it quoted.

Product Highlights

Wide array of custom options
Fully dimensioned part drawings must be provided
Prepunched holes and specialized slotting available
Precision fabrication meeting exacting specifications
Maximum length is 10'-0"

20 gauge (33mil)
Design Thickness: 0.0346 inches
Minimum Thickness: 0.0329"
18 gauge (43mil)
Design Thickness: 0.0451 inches
Minimum Thickness: 0.0428"
16 gauge (54mil)
Design Thickness: 0.0566 inches
Minimum Thickness: 0.0538"
14 gauge (68mil)
Design Thickness: 0.0713 inches
Minimum Thickness: 0.0677"
12 gauge (97mil)
Design Thickness: 0.1017 inches
Minimum Thickness: 0.0966"
10 gauge (118mil)
Design Thickness: 0.1242 inches
Minimum Thickness: 0.1180"

Installation

INSTALLATION Will vary based upon application. Consult the engineer of record. The performance and installation of custom-made products is the sole responsibility of the design professional and engineer of record. Any customer ordering a custom-fabricated clip, connector or support shall indemnify, defend and hold harmless Clarkwestern Dietrich Building Systems LLC, ClarkDietrich Building Systems, and ClarkDietrich Engineering Services for any loss or damage arising in whole or in part.

Documents

Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.

Ask About This Product

Answered from ClarkDietrich's own documents — the 3 sheets listed above — with the source and page behind every line.

AI · cites its sources