walls.one
Log in
EasyClip™ S-Series™ Support Clip

ClarkDietrich · Roof & Truss Connections

EasyClip™ S-Series™ Support Clip

Quote required

1-1/2" x 1-1/2" legs.

ClarkDietrich EasyClip™ S-Series™ support clips are commonly used for rigid connections in window and door framing, joist, bypass or other miscellaneous connections to secure one framing member to another, or to secure framing members to the structural frame. Available in a variety of lengths and gauges, EasyClip S-Series clips are prepunched for faster and more accurate fastener placement.

Rigid ConnectionsBridging & Bracing ConnectionsFloor Joist Framing ConnectionsRoof & Truss Connections
Material
Structural Grade 50 Type H (ST50H), 50ksi
Coating
G90 (Z275) hot-dipped galvanized coating

Description, photography, tables and documents as published by ClarkDietrich. Their product page ↗

Product Data & Ordering Information

15 codes. Every figure is ClarkDietrich's published data.
Product codeGaugeMilsDesign thickness (in)Size (in)PackagingSubmittal
S54316540.05661-1/2 x 1-1/2 x 3400 pieces per bucketPDF ↗
S54516540.05661-1/2 x 1-1/2 x 5200 pieces per bucketPDF ↗
S54716540.05661-1/2 x 1-1/2 x 7100 pieces per bucketPDF ↗
S54916540.05661-1/2 x 1-1/2 x 9100 pieces per bucketPDF ↗
S54116540.05661-1/2 x 1-1/2 x 11100 pieces per bucketPDF ↗
S68314680.07131-1/2 x 1-1/2 x 3200 pieces per bucketPDF ↗
S68514680.07131-1/2 x 1-1/2 x 5200 pieces per bucketPDF ↗
S68714680.07131-1/2 x 1-1/2 x 7100 pieces per bucketPDF ↗
S68914680.07131-1/2 x 1-1/2 x 9100 pieces per bucketPDF ↗
S68114680.07131-1/2 x 1-1/2 x 11100 pieces per bucketPDF ↗
S97312970.10171-1/2 x 1-1/2 x 3200 pieces per bucketPDF ↗
S97512970.10171-1/2 x 1-1/2 x 5150 pieces per bucketPDF ↗
S97712970.10171-1/2 x 1-1/2 x 7100 pieces per bucketPDF ↗
S97912970.10171-1/2 x 1-1/2 x 980 pieces per bucketPDF ↗
S97112970.10171-1/2 x 1-1/2 x 1170 pieces per bucketPDF ↗

Codes are what ClarkDietrich publishes as available, not a promise of local stock — tell the desk the connection you have and we'll confirm what's on a shelf. A code with no sheet of its own can be generated from ClarkDietrich SubmittalPro ↗.

Product Highlights

  • 1-1/2" x 1-1/2" legs.
  • Lengths available in 3", 5", 7", 9" and 11".
  • Available in 16, 14, and 12 gauge.
  • See submittals for product weights

Installation

EasyClip S-Series support clips are attached to the cold-formed steel (CFS) framing members using #10 minimum self-drilling screws driven through the clip holes into the steel framing. When not filling all holes, install fasteners symmetrically starting at the top and bottom edges and move toward the center of the clip. Clip can also be welded to the CFS framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding. When using the tabular values for a welded clip, provide a full weld to the structure, top to bottom, along the outside of the clip. A 3/4" minimum weld on the outside edge of the 1-1/2" leg is also required to control warping or to hold the clip in place before final welding.

ClarkDietrich Suggests Instead

Connectors they list as alternatives for this connection.

  • SwiftClip™ LS-Series™ Support Clip
  • EasyClip™ U-Series™ Clip Angle
  • EasyClip™ X-Series™ Clip Angle

Documents

Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.

CAD Details

54 details for this connection, each published as a PDF to read and a DWG and DXF to draw with.

Ask About This Product

Answered from ClarkDietrich's own documents — the 3 sheets listed above — with the source and page behind every line.

AI · cites its sources

Answers come from ClarkDietrich's published documents and our own product record, and are generated — check anything you are about to build to against the source we link. Never quotes prices; the page above does that.