ClarkDietrich · Specialty Clips & Connectors
Metal Furring Channel Clips (MFCC)
Quote requiredSecurely fastens furring channel to U-channel
Clips must be installed on alternating sides of the 1-1/2" channels. Use tie wire when clips cannot be alternated. Clips should only be used when single-layer gypsum or single-layer veneer plaster base is used.
Description, photography, tables and documents as published by ClarkDietrich. Their product page ↗
Product Data & Ordering Information
1 code. Every figure is ClarkDietrich's published data.| Product code | Diameter | Nominal Load1 | Allowable Load (ASD Load)2 | Submittal | |
|---|---|---|---|---|---|
| MFCC | 0.134" | 200 lbs | 50 lbs | PDF ↗ |
Codes are what ClarkDietrich publishes as available, not a promise of local stock — tell the desk the connection you have and we'll confirm what's on a shelf. A code with no sheet of its own can be generated from ClarkDietrich SubmittalPro ↗.
Product Highlights
- Securely fastens furring channel to U-channel
- Corrosion-resistant galvanized wire
- 1 Nominal Load does not include safety factor
- 2 Allowable Load (ASD) includes a Safety factor of 4 for each clip used.
Documents
Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.
- SustainabilityPROSustainability
- MFCC Catalog PageCatalog page
- ASTM A641Document
- ASTM C754Document
- AISI S100-16 (2020) w/S2-20Code report
- SDS For ASTM A1003 Steel Framing ProductsSafety data sheet
- AIA / CEUDocument
- CAD Details LibraryCAD detail
- Clip Express Product CatalogCatalog page
- Architectural SpecsSpecification
- CAD DetailsCAD detail
CAD Details
4 details for this connection, each published as a PDF to read and a DWG and DXF to draw with.
Ask About This Product
Answered from ClarkDietrich's own documents — the 3 sheets listed above — with the source and page behind every line.