ClarkDietrich · Specialty Clips & Connectors
Panel Lift Clip (PLC)
Quote requiredOur Panel Lift Clip is load rated and is used to safely lift wall panels at assembly warehouses or on a job-site.
Our Panel Lift Clip is load rated and is used to safely lift wall panels at assembly warehouses or on a job-site. The clip comes pre-punched for screw attachment to the panel as well as a larger hole for the clamp. The rounded design of the top of the panel clip allows for the clamp to slide freely without getting stuck on the corners. The Panel Lift Clip comes in 12ga and is offered in two sizes 8” and 12”.
- Material
- Specifications
Description, photography, tables and documents as published by ClarkDietrich. Their product page ↗
Product Data & Ordering Information
4 codes. Every figure is ClarkDietrich's published data.| Product code | Packaging | Overall Length | Submittal | |
|---|---|---|---|---|
| PLC8-97 | Bucket of 100 | 8" | — | |
| PLC12-97 | Bucket of 50 | 12" | — | |
| PLC8 | — | — | PDF ↗ | |
| PLC12 | — | — | PDF ↗ |
Codes are what ClarkDietrich publishes as available, not a promise of local stock — tell the desk the connection you have and we'll confirm what's on a shelf. A code with no sheet of its own can be generated from ClarkDietrich SubmittalPro ↗.
Installation
at Panel Ends Install the Panel Lift Clips to each side and intermediate points of the panel. For intermediate clip installation, cut a groove large enough to insert the clip through the top track. Quantity, location and anchoring of clips to panel as designed by EOR. Panel Lift Clip is for single use only, and cannot be reused or reattached. Installation at Intermediate Panel Locations Intermediate clip(s) are required for hoisting the panel. For intermediate clip installation, cut a groove large enough to insert the clip through the top track. Quantity, location and anchoring of clips to panel as designed by EOR. Panel Lift Clip is for single use only, and cannot be reused or reattached. Hoisting of Panel A spreader bar with intermediate hoisting points is required.
Documents
Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.
Ask About This Product
Answered from ClarkDietrich's own documents — the 3 sheets listed above — with the source and page behind every line.