Pony Wall

Codes are what ClarkDietrich publishes as available, not a promise of local stock — tell the desk the connection you have and we'll confirm what's on a shelf. A code with no sheet of its own can be generated from ClarkDietrich SubmittalPro ↗.

Installation

InstallationInstall the Pony Wall inside the track or directly to the floor structure. Anchor to the floor as designed by EOR. Attach the studs to both flanges of the Pony Wall. A minimum of 2-1/2" stud member can be used with the Pony Wall Lite and a minimum of 3-1/2" stud member can be used with the Pony Wall Heavy.

ClarkDietrich Suggests Instead

Connectors they list as alternatives for this connection.

• ClarkDietrich Moment Clip (MC Series)
• ClarkDietrich Moment Clip (MC Series)

Documents

Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.

• BIMBIM / Revit
• SustainabilityPROSustainability
• Pony Wall Lite (16ga) Catalog PageCatalog page
• Pony Wall Heavy (12ga) Catalog PageCatalog page
• ASTM A36Document
• ASTM A1011Document
• SDS For ASTM A1011 Steel Framing ProductsSafety data sheet
• SDS For ASTM A36 Steel Framing ProductsSafety data sheet
• AISI S100-16 (2020) w/S2-20Code report
• SDS For ASTM A1003 Steel Framing ProductsSafety data sheet
• AIA / CEUDocument
• CAD Details LibraryCAD detail
• Clip Express Product CatalogCatalog page
• Architectural SpecsSpecification
• CAD DetailsCAD detail

CAD Details

2 details for this connection, each published as a PDF to read and a DWG and DXF to draw with.

• CD Stud Connection PonyWall-2PDFDWGDXF
• CD Stud Connection PonyWall-1PDFDWGDXF