ClarkDietrich · Bridging & Bracing Connections
Spazzer® Bar Fly Clip (SFLY)
Quote requiredTraditionally, at the end of a section, the Spazzer bar would need to be cut and bent to keep the bar in place.
Traditionally, at the end of a section, the Spazzer bar would need to be cut and bent to keep the bar in place. With the new Spazzer bar fly clip, installation is as easy as fastening the prepunched clip to the stud and the Spazzer bar. The excess Spazzer bar is cut and installation is complete. The Spazzer fly clip is the perfect solution for installing off module studs with the 5400 series Spazzer bar. Simply cut the Spazzer bar just short of the stud web, and use the Spazzer fly clip to quickly connect the Spazzer bar to the face of the stud with self-drilling framing screws.
- Coating
- G90
- Yield Strength
- 50ksi
Description, photography, tables and documents as published by ClarkDietrich. Their product page ↗
Product Data & Ordering Information
1 code. Every figure is ClarkDietrich's published data.| Product code | Gauge | Mils | Design thickness (in) | Size (in) | Packaging | Submittal | |
|---|---|---|---|---|---|---|---|
| SFLY | 18 | 43 | 0.0451 | 1 x 1-1/4 x 1 | 100 pieces per carton | PDF ↗ |
Codes are what ClarkDietrich publishes as available, not a promise of local stock — tell the desk the connection you have and we'll confirm what's on a shelf. A code with no sheet of its own can be generated from ClarkDietrich SubmittalPro ↗.
Installation
Load-Bearing Wall InstallationThe TradeReady Spazzer 5400 spacer bar is passed through the stud knockouts and rotated 90º into position, engaging each side of the knockout. In load-bearing applications, some type of attachment is required to keep the bar in place—the Spazzer bar fly clip is an optimum solution. The TradeReady Spazzer 5400 bar should be installed at a maximum 4' o.c. vertically or per specifications. The Spazzer bar should not be used in studs over 8" wide.
ClarkDietrich Suggests Instead
Connectors they list as alternatives for this connection.
- Traditional cutting and bending
Documents
Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.
CAD Details
1 detail for this connection, each published as a PDF to read and a DWG and DXF to draw with.
Ask About This Product
Answered from ClarkDietrich's own documents — the 3 sheets listed above — with the source and page behind every line.