walls.one
SwiftClip™ 150 x 300 LE-Series

ClarkDietrich · Roof & Truss Connections

SwiftClip™ 150 x 300 LE-Series

Quote required

Pre-punched SwiftClips™ are used for multiple construction applications.

Pre-punched SwiftClips™ are used for multiple construction applications. 1-1/2" leg x 3" leg clips are commonly used for floor joist hangers and truss connections. Fixed clips should not be used in place of a deflection clip.

Rigid ConnectionsFloor Joist Framing ConnectionsRoof & Truss Connections
Material
Structural Grade 50 Type H (ST50H), 50ksi
Coating
G90 (Z275) hot-dipped galvanized coating
Common application
Fixed/Joists/Truss

Description, photography, tables and documents as published by ClarkDietrich. Their product page ↗

Product Data & Ordering Information

9 codes. Every figure is ClarkDietrich's published data.
Product codeGaugeMilsDesign thickness (in)Size (in)PackagingSubmittal
LE54316540.05661-1/2 x 3 x 3-1/4100 pieces per bucketPDF ↗
LE68314680.07131-1/2 x 3 x 3-1/4100 pieces per bucketPDF ↗
LE97312970.10171-1/2 x 3 x 3-1/450 pieces per bucketPDF ↗
LE54516540.05661-1/2 x 3 x 5-1/2100 pieces per bucketPDF ↗
LE68514680.07131-1/2 x 3 x 5-1/2100 pieces per bucketPDF ↗
LE97512970.10171-1/2 x 3 x 5-1/250 pieces per bucketPDF ↗
LE54716540.05661-1/2 x 3 x 7-1/4100 pieces per bucketPDF ↗
LE68714680.07131-1/2 x 3 x 7-1/450 pieces per bucketPDF ↗
LE97712970.10171-1/2 x 3 x 7-1/450 pieces per bucketPDF ↗

Codes are what ClarkDietrich publishes as available, not a promise of local stock — tell the desk the connection you have and we'll confirm what's on a shelf. A code with no sheet of its own can be generated from ClarkDietrich SubmittalPro ↗.

Installation

INSTALLATION SwiftClip Support Clips are attached to the cold-formed steel (CFS) framing members using #10 minimum self-drilling screws driven through the clip holes into the steel framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding. It is the responsibility of the design engineer to detail the attachment of clips and verify their capacity meets the application. Place the first two screws in each leg in the outermost screw holes. Place the next two screws (if needed) in center holes next to the CRC holes (diagonal). The next screws (if needed) are placed moving from the outermost holes toward the center, symmetrically.

ClarkDietrich Suggests Instead

Connectors they list as alternatives for this connection.

  • SwiftClip™ 1-1/2" x 1-1/2" (LS-Series)
  • SwiftClip™ 3" x 3" (LA-Series)
  • EasyClip™ Support & End Clips

Documents

Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.

CAD Details

24 details for this connection, each published as a PDF to read and a DWG and DXF to draw with.

Ask About This Product

Answered from ClarkDietrich's own documents — the 3 sheets listed above — with the source and page behind every line.

AI · cites its sources

Answers come from ClarkDietrich's published documents and our own product record, and are generated — check anything you are about to build to against the source we link. Never quotes prices; the page above does that.