ClarkDietrich · Roof & Truss Connections
Uni-Clip™ End Clip (UCEC)
Quote requiredDesigned to transfer large horizontal and vertical loads.
The Uni-Clip™ framing clip has stiffened corners that provide superior design values and are installed easily with screws or powder-actuated fasteners. This clip is ideal for most rigid connections, including shear, tension and two-axis loading. Click the below Product Code to view Tech Datasheet
- Material
- Structural Grade 50 Type H (ST50H), 50ksi
- Coating
- G90 (Z275) hot-dipped galvanized coating
Description, photography, tables and documents as published by ClarkDietrich. Their product page ↗
Product Data & Ordering Information
1 code. Every figure is ClarkDietrich's published data.| Product code | Gauge | Mils | Design thickness (in) | Size (in) | Packaging | Submittal | |
|---|---|---|---|---|---|---|---|
| UCEC | 14 | 68 | 0.0713 | 3-1/2 x 1-1/2 x 4-1/2 | 25 pieces per carton | PDF ↗ |
Codes are what ClarkDietrich publishes as available, not a promise of local stock — tell the desk the connection you have and we'll confirm what's on a shelf. A code with no sheet of its own can be generated from ClarkDietrich SubmittalPro ↗.
Product Highlights
- Designed to transfer large horizontal and vertical loads.
- Universal multi-application connector.
- Stiffened corners result in superior design values.
- Embossed fastening patterns to ensure accurate placement of fasteners.
- See submittals for product weights
Installation
Clips are attached to cold-formed steel framing members using #10 minimum self-drilling screws driven through the clip holes into the steel framing. Follow the required fastener placement patterns to achieve the allowable load. Connections to the primary building frame can be made with powder-actuated fasteners, screws or welds per design requirement. Follow the required anchor placement pattern to achieve the allowable load.
Documents
Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.
- BIMBIM / Revit
- SustainabilityPROSustainability
- UCEC Catalog PageCatalog page
- IAPMO ER-0731Document
- AISI S100-16 (2020) w/S2-20Code report
- SDS For ASTM A1003 Steel Framing ProductsSafety data sheet
- AIA / CEUDocument
- CAD Details LibraryCAD detail
- Clip Express Product CatalogCatalog page
- Architectural SpecsSpecification
- CAD DetailsCAD detail
CAD Details
7 details for this connection, each published as a PDF to read and a DWG and DXF to draw with.
- Kicker Connection to Bottom of Beam 2PDFDWGDXF
- Kicker Connection to Bottom of Slab 2PDFDWGDXF
- Rafter Connection with UniClipPDFDWGDXF
- Stud Connection Rigid UNI-CLIPPDFDWGDXF
- Stud Connection Rigid UNI-CLIP and Support StudPDFDWGDXF
- Stud Connection Rigid UNI-CLIP To SlabPDFDWGDXF
- Stud Framed Suspended CeilingPDFDWGDXF
Ask About This Product
Answered from ClarkDietrich's own documents — the 3 sheets listed above — with the source and page behind every line.