ClarkDietrich · Floor Joist Framing Connections
Universal Joist Hanger (UJH)
Quote requiredThe Universal Joist Hangers (UJH) 68mils (14ga) or 97mils (12ga) are used to connect joists to CFS headers (with screws, welds or PAF fasteners) and steel I-beams (with welds or PAF fasteners).
The Universal Joist Hangers (UJH) 68mils (14ga) or 97mils (12ga) are used to connect joists to CFS headers (with screws, welds or PAF fasteners) and steel I-beams (with welds or PAF fasteners). The UJH is sized to fit joist sizes from 8" to 14" deep.
- Material
- Structural Grade 50 Type H (ST50H), 50ksi
- Coating
- G90 (Z275) hot-dipped galvanized coating
- Packaging
- 50 pieces per bucket
Description, photography, tables and documents as published by ClarkDietrich. Their product page ↗
Product Data & Ordering Information
2 codes. Every figure is ClarkDietrich's published data.Codes are what ClarkDietrich publishes as available, not a promise of local stock — tell the desk the connection you have and we'll confirm what's on a shelf. A code with no sheet of its own can be generated from ClarkDietrich SubmittalPro ↗.
Installation
Clip to Joist Attachment: The joist flange must rest on top of the Universal Joist Hanger as shown in the image to the right. Attach the UJH hanger with specified number of #10 or #14 screws as listed in the table below under the Joist column. Clip attachment to CFS Header: Attach the UJH hanger to the top and side (face) of the CFS Header with specified number of #10 screws as listed in the table below. Clip attachment to Structural Beam: Welded Connection: The minimum required weld to the top flange is 2" fillet weld to each side of top flange. Special considerations must be taken when welding galvanized steel. PAF (Powder Actuated Fasteners): For powder actuated fasteners attachment (PAF, 0.157"), steel headers shall have minimum 3/16" thickness and minimum yield strength of 36 ksi.
Documents
Served straight from ClarkDietrich so you always get the current revision. Each code's own submittal sheet is on its row in the table above.
- SustainabilityPROSustainability
- Universal Joist Hanger Catalog PageCatalog page
- AISI S100-16 (2020) w/S2-20Code report
- SDS For ASTM A1003 Steel Framing ProductsSafety data sheet
- AIA / CEUDocument
- CAD Details LibraryCAD detail
- Clip Express Product CatalogCatalog page
- Architectural SpecsSpecification
- CAD DetailsCAD detail
CAD Details
4 details for this connection, each published as a PDF to read and a DWG and DXF to draw with.
Ask About This Product
Answered from ClarkDietrich's own documents — the 3 sheets listed above — with the source and page behind every line.