MaxTrak® Slotted Deflection Track

MaxTrak® Slotted Deflection Track and MaxTrak 2D Slotted Deflection & Drift Track let the top of a stud float within the track legs, absorbing primary-structure live-load movement without transferring axial load into the wall studs. MaxTrak 2D adds web slots for horizontal seismic drift.

Gauge / mil

30 mil

Yield

33 ksi (structural, 30mil–43mil range) — confirm by leg/gauge combination

Coating

CP60 / G40EQ depending on structural vs. non-structural line

Rolled to match the stud width it caps — order it in the same web size as your wall stud
2-1/2" leg MaxTrak: 1-1/2" long slots, total allowable vertical deflection 1-1/2" (3/4"±)
3" leg MaxTrak: 2" long slots, total allowable vertical deflection 2" (1"±)
MaxTrak 2D adds up to 4" total allowable horizontal drift movement (2"±)
Non-structural MaxTrak comes in the 2-1/2" leg only; structural comes in 2-1/2" and 3"
One-piece system — no additional deflection clips or components to install
MaxTrak 2-1/2" leg system carries Intertek code report CCRR-0205
Integrates with UL® head-of-wall fire-stop systems; UL Designs 2079 Fifth Edition

Head-of-Wall ConnectionChase WallFire-Rated SystemsExterior Curtain Wall

Worth knowing before you specify

MaxTrak is ordered by leg height and structural / non-structural line rather than by a per-width member code — ClarkDietrich publishes one submittal sheet per configuration, covering every stud width it is rolled for. Pick your wall's web width in the order panel.

Members

6 of 6 members. Every figure is ClarkDietrich's published data.

Member #	Variant	Size	Flange	Gauge	Mil	Ksi	Coating
MaxTrak-STR	MaxTrak 2-1/2" Leg — Structural	per stud width	2-1/2"	structural	30 mil	—	CP60	Submittal ↗
MaxTrak-3inLeg-STR	MaxTrak 3" Leg — Structural	per stud width	3"	structural	30 mil	—	CP60	Submittal ↗
MaxTrak2D-STR	MaxTrak 2D 2-1/2" Leg — Structural	per stud width	2-1/2"	structural	30 mil	—	CP60	Submittal ↗
MaxTrak2D-3inLeg-STR	MaxTrak 2D 3" Leg — Structural	per stud width	3"	structural	30 mil	—	CP60	Submittal ↗
MaxTrak-DW	MaxTrak 2-1/2" Leg — Non-Structural (Drywall)	per stud width	2-1/2"	20 ga EQ	30 mil	—	G40EQ	Submittal ↗
MaxTrak2D-DW	MaxTrak 2D 2-1/2" Leg — Non-Structural (Drywall)	per stud width	2-1/2"	20 ga EQ	30 mil	—	G40EQ	Submittal ↗

Specifications

As published by ClarkDietrich.

Material: Slotted U-track — Structural and Non-Structural (drywall) MaxTrak and MaxTrak 2D
Yield strength: 33 ksi (structural, 30mil–43mil range) — confirm by leg/gauge combination
Coating: CP60 / G40EQ depending on structural vs. non-structural line
Design standard: AISI S100, S220, S240
Code approvals: Intertek CCRR-0205 · UL Designs 2079 (5th Ed.) · UL File XHLI.R26034 (types SLT, SLT-H)
Fire rated: Integrates with UL head-of-wall fire-stop systems
Sizes: per stud width
Gauge / mil: 30 mil

Documents

12 documents, served straight from ClarkDietrich and its testing agencies so you always get the current revision.

Ask About This Product

Answered from ClarkDietrich's own documents — the 8 sheets listed above — with the source and page behind every line.

AI · cites its sources

Order this member

MaxTrak-STR

MaxTrak 2-1/2" Leg — Structural

per stud width · structural · 30 mil

Web Width

Gauge / Mil

Coating

Length

Qty

Mark (optional)

In stock362SLT-33

On the shelf now — this size ships or picks up from stock.

936 LF in stock across 4 yards.

Price$2,317.00

per MLF · $2.32 / LF

Quoted per MLF (1,000 linear feet), the way steel is bought. Profile, gauge and code-approval data are ClarkDietrich's published figures.

Need a boxed beam or wall panel?

This member is available in the Prefabrication configurators too — build boxed beams and shop-built wall panels straight from the ClarkDietrich stud and track line.

Go to Prefabrication