Interior · 2-1/2" – 6" (4 sizes)
View on ClarkDietrich ↗ClarkDietrich
Special orderTRAKLOC® Elevator Stud
TRAKLOC® allows you to order one length member and adjust it in the field instead of cutting studs to fit varying jobsite conditions. The two-piece TRAKLOC® Elevator Stud® arrives compressed to fit in a building elevator, then telescopes to the required length at the point of installation.
Gauge / mil
24 – 33 mil
Yield
57 ksi (24mil / 20EQ) · 33 ksi (30mil, 33mil)
Coating
G40 standard, G60 available as special order
- Standard web depths 2-1/2", 3-5/8", 4" and 6" with a 1-1/4" flange and 0.288" lip
- Three thicknesses: 24mil (20EQ) 57ksi, 30mil (20ga DW) 33ksi and 33mil (20ga) 33ksi
- Reduces the cost of stocking long studs on floors only accessible by elevator or stairway
- Less cutting means less scrap, less noise, less airborne dust and improved air quality
- Elevator studs over 21'-0" ship as two unassembled components
- Store indoors, free of dust and airborne particulates, to preserve the telescoping fit
- Licensed under U.S. Patents 7,223,043 · 7,594,331 · 8,061,099 · 8,074,416 (plus Japan and Australia patents)
Worth knowing before you specify
TRAKLOC is not stocked in every market and carries a minimum order — check with your local ClarkDietrich sales representative before you specify it. ClarkDietrich publishes fixed submittal sheets for the 3-5/8" 24mil and 30mil members; the other widths and the 33mil gauge come off SubmittalPro's generator.
Designed for interior non-load-bearing walls only. Do not stack.
Members
12 of 12 members. Every figure is ClarkDietrich's published data.
| Member # | Variant | Size | Flange | Gauge | Mil | Ksi | Coating | ||
|---|---|---|---|---|---|---|---|---|---|
| 250TLE125-24 | TRAKLOC Elevator Stud 24mil | 2-1/2" | 1-1/4" | 20 ga EQ | 24 mil | 57 ksi | G40 | Submittal ↗ | |
| 250TLE125-30 | TRAKLOC Elevator Stud 30mil | 2-1/2" | 1-1/4" | 20 ga DW | 30 mil | 33 ksi | G40 | Submittal ↗ | |
| 250TLE125-33 | TRAKLOC Elevator Stud 33mil | 2-1/2" | 1-1/4" | 20 ga | 33 mil | 33 ksi | G40 | Submittal ↗ | |
| 362TLE125-24 | TRAKLOC Elevator Stud 24mil | 3-5/8" | 1-1/4" | 20 ga EQ | 24 mil | 57 ksi | G40 | Submittal ↗ | |
| 362TLE125-30 | TRAKLOC Elevator Stud 30mil | 3-5/8" | 1-1/4" | 20 ga DW | 30 mil | 33 ksi | G40 | Submittal ↗ | |
| 362TLE125-33 | TRAKLOC Elevator Stud 33mil | 3-5/8" | 1-1/4" | 20 ga | 33 mil | 33 ksi | G40 | Submittal ↗ | |
| 400TLE125-24 | TRAKLOC Elevator Stud 24mil | 4" | 1-1/4" | 20 ga EQ | 24 mil | 57 ksi | G40 | Submittal ↗ | |
| 400TLE125-30 | TRAKLOC Elevator Stud 30mil | 4" | 1-1/4" | 20 ga DW | 30 mil | 33 ksi | G40 | Submittal ↗ | |
| 400TLE125-33 | TRAKLOC Elevator Stud 33mil | 4" | 1-1/4" | 20 ga | 33 mil | 33 ksi | G40 | Submittal ↗ | |
| 600TLE125-24 | TRAKLOC Elevator Stud 24mil | 6" | 1-1/4" | 20 ga EQ | 24 mil | 57 ksi | G40 | Submittal ↗ | |
| 600TLE125-30 | TRAKLOC Elevator Stud 30mil | 6" | 1-1/4" | 20 ga DW | 30 mil | 33 ksi | G40 | Submittal ↗ | |
| 600TLE125-33 | TRAKLOC Elevator Stud 33mil | 6" | 1-1/4" | 20 ga | 33 mil | 33 ksi | G40 | Submittal ↗ |
Specifications
As published by ClarkDietrich.
- Material
- Two-piece telescoping C-stud — TRAKLOC Elevator Stud (TLE)
- Yield strength
- 57 ksi (24mil / 20EQ) · 33 ksi (30mil, 33mil)
- Coating
- G40 standard, G60 available as special order
- Design standard
- AISI S100-12, S220-11
- Code approvals
- Not all TRAKLOC products are available in all markets — confirm with your local rep
- Limitations of use
- Designed for interior non-load-bearing walls only. Do not stack.
- Sizes
- 2-1/2" – 6" (4 sizes)
- Gauge / mil
- 24 – 33 mil
Documents
10 documents, served straight from ClarkDietrich and its testing agencies so you always get the current revision.
- TRAKLOC Elevator Studs (TLE) — Composite Load TablesData sheet · PDF ↗
- TRAKLOC Elevator Studs (TLE) — Non-Composite, Fully BracedData sheet · PDF ↗
- TRAKLOC Elevator Studs (TLE) — Non-Composite, Braced at 48" o.c.Data sheet · PDF ↗
- Veneklasen Associates — Acoustical Review of ProSTUD® and TRAKLOC®Data sheet · PDF ↗
- SubmittalPro® — TRAKLOC (generate any width / gauge)Submittal · PDF ↗
- AISI S100-12Code report · Link ↗
- AISI S220-11Code report · Link ↗
- ClarkDietrich Architectural SpecificationsData sheet · Link ↗
- ClarkDietrich Product IdentificationData sheet · PDF ↗
- SDS — ASTM A1003 Steel Framing ProductsSDS · PDF ↗
Ask About This Product
Answered from ClarkDietrich's own documents — the 8 sheets listed above — with the source and page behind every line.