walls.one

Metal framing

Metal Stud Gauge Chart: Gauge, Mils and Steel Thickness

Updated

Short answer

Metal studs are ordered by mils (thousandths of an inch), not gauge. 25 gauge is 18 mil, 20 gauge is 30 mil for drywall studs and 33 mil for structural studs, 18 gauge is 43 mil, 16 gauge is 54 mil, 14 gauge is 68 mil and 12 gauge is 97 mil. A lower gauge number is thicker steel.

Gauge to Mil Chart

Standard cold-formed steel framing thicknesses
GaugeMilsDesign thicknessMinimum thicknessYield strengthExample part
25 ga180.0188"0.0179"33 ksi087F125-18
20 ga drywall (DW)300.0312"0.0296"33 ksi362PDS125-30
20 ga structural (STR)330.0346"0.0329"33 ksi362S162-33-P
18 ga430.0451"0.0428"33 ksi362S162-43-P
16 ga540.0566"0.0538"50 ksi600S162-54-P
14 ga680.0713"0.0677"50 ksi600S162-68-P
12 ga970.1017"0.0966"50 ksi600S162-97-P
Yield strength is ClarkDietrich's standard for each thickness. Minimum thickness is 95% of design thickness, the thinnest the steel may be delivered.

The mil number is the minimum delivered thickness of the bare steel in thousandths of an inch, rounded. It is the last number in a part number: 362S162-33 is 33 mil. See how to read a metal stud part number.

20 Gauge Has Two Thicknesses

"20 gauge" on a drawing can mean 30 mil or 33 mil. 30 mil is the drywall stud, used for interior non-load-bearing partitions. 33 mil is the structural stud, the lightest thickness used for load-bearing and exterior framing. They are different members with different part numbers, so check which one the wall type or the structural notes call for before ordering.

EQ Studs Are Thinner Than the Gauge They Replace

ClarkDietrich ProSTUD equivalent (EQ) thicknesses
Sold asMilsDesign thicknessYield strengthReplacesExample part
25 ga EQ (ProSTUD 25)150.0158"50 ksi25 ga, 18 mil362PDS125-15
20 ga EQ (ProSTUD 20)180.0190"70 ksi20 ga drywall, 30 mil362PDS125-18

An EQ stud uses higher-strength steel and a stiffened shape to match the wall heights of the heavier conventional stud. It is for interior non-load-bearing walls only. EQ studs explained covers when a spec allows them and when it does not.

Where Each Thickness Is Used

  • 15 and 18 mil EQ, 18 mil (25 ga): interior drywall partitions, furring and soffits that carry no load.
  • 30 mil (20 ga drywall): taller partitions, door and window framing, walls that carry cabinets or heavy fixtures.
  • 33 and 43 mil (20 and 18 ga structural): exterior curtain walls, load-bearing walls, headers and joists on lighter loads.
  • 54, 68 and 97 mil (16, 14 and 12 ga): load-bearing and exterior framing, jambs, headers, joists and connections where the engineer calls for it.

The thickness for a given wall comes from the manufacturer's limiting height tables or the engineer's design, not from the gauge alone. Stud depth, spacing and wall height all change the answer.

Common Questions

How thick is a 25 gauge metal stud?
A standard 25 gauge stud is 18 mil, with a design thickness of 0.0188 inch. A 25 gauge EQ stud such as ProSTUD 25 is 15 mil, 0.0158 inch, in higher-strength steel.
How thick is a 20 gauge metal stud?
It depends on the type. A 20 gauge drywall stud is 30 mil (0.0312 inch design thickness). A 20 gauge structural stud is 33 mil (0.0346 inch). A 20 gauge EQ stud such as ProSTUD 20 is 18 mil (0.0190 inch).
Is 20 gauge thicker than 25 gauge?
Yes. A lower gauge number is thicker steel. 20 gauge drywall studs are 30 mil and 25 gauge studs are 18 mil.
What does mil mean on a metal stud?
A mil is one thousandth of an inch. The mil number on a stud is the minimum thickness of the bare steel before coating, so a 33 mil stud is at least 0.0329 inch thick.
What is 18 gauge in mils?
18 gauge is 43 mil, with a design thickness of 0.0451 inch.
What is 16 gauge in mils?
16 gauge is 54 mil, with a design thickness of 0.0566 inch.

Order it

Stock lengths or cut to your exact size, priced before you send the order. Not sure what the job takes? Send the plans and we will send back a material list.

Sources

Figures are the manufacturers’ published values and the catalog’s own data. The project drawings, specifications and the engineer of record govern what a job requires.