Metal framing
EQ Studs Explained: 25 Gauge EQ and 20 Gauge EQ
Updated
Short answer
An EQ stud is a drywall stud made from thinner, higher-strength steel with a stiffened shape, built to match the wall heights of a standard gauge. 25 gauge EQ is 15 mil instead of 18 mil, and 20 gauge EQ is 18 mil instead of 30 mil. EQ studs are for interior non-load-bearing walls only.
EQ Compared With Standard Gauge
| Stud | Mils | Design thickness | Yield strength | Example part |
|---|---|---|---|---|
| 25 ga EQ — ProSTUD 25 | 15 | 0.0158" | 50 ksi | 362PDS125-15 |
| 25 ga standard | 18 | 0.0188" | 33 ksi | 362S125-18 |
| 20 ga EQ — ProSTUD 20 | 18 | 0.0190" | 70 ksi | 362PDS125-18 |
| 20 ga drywall standard | 30 | 0.0312" | 33 ksi | 362PDS125-30 |
The steel is thinner but stronger: 50 or 70 ksi against 33 ksi. Grooves in the flange and offsets in the web add stiffness. The result is a lighter stud that is rated for similar wall heights in the manufacturer's tables.
Where EQ Studs Are Used
- Interior non-load-bearing drywall partitions, chase walls, furring and soffits.
- Fire-rated and sound-rated walls, when the assembly was tested with that stud. ProSTUD is UL Classified in over 50 designs.
- Walls within the heights the manufacturer's limiting height table gives for that stud depth, spacing and deflection limit.
Where to Use a Standard Gauge Instead
- Load-bearing and exterior walls. EQ drywall studs are not structural members. Use structural studs at 33 mil and heavier.
- Specs that give a minimum steel thickness. A spec that says 0.0296 inch minimum, or 30 mil, rules out an 18 mil EQ stud even though both are called 20 gauge.
- Door jambs and heavy attachments. Many wall types call for 30 or 33 mil at jambs, and behind cabinets, grab bars and wall-hung equipment.
- Fire-rated designs that list a thicker stud. Use the steel thickness the UL design or the manufacturer's listing names.
Limiting height tables are specific to each manufacturer's stud. An EQ stud from one manufacturer cannot be checked against another manufacturer's table.
How to Tell Them Apart When Ordering
Read the last number of the part number. 362PDS125-15 is 25 gauge EQ, 362PDS125-18 is 20 gauge EQ, 362PDS125-30 is standard 20 gauge drywall and 362PDS125-33 is 20 gauge structural thickness. The gauge chart lists every thickness, and how to read a part number covers the rest of the code.
Common Questions
- What does EQ mean on a metal stud?
- EQ means equivalent. An EQ stud is thinner than the standard gauge it is named after but uses higher-strength steel and a stiffened shape to reach similar wall heights. It is used for interior non-load-bearing walls.
- How thick is a 20 gauge EQ stud?
- ClarkDietrich's 20 gauge EQ stud, ProSTUD 20, is 18 mil with a design thickness of 0.0190 inch and 70 ksi steel. A standard 20 gauge drywall stud is 30 mil, 0.0312 inch.
- How thick is a 25 gauge EQ stud?
- ClarkDietrich's 25 gauge EQ stud, ProSTUD 25, is 15 mil with a design thickness of 0.0158 inch and 50 ksi steel. A standard 25 gauge stud is 18 mil, 0.0188 inch.
- Can EQ studs be used in load-bearing walls?
- No. EQ drywall studs such as ProSTUD are for interior non-load-bearing walls only. Load-bearing and exterior walls use structural studs at 33 mil and heavier.
- Is 20 gauge EQ the same as 20 gauge?
- No. 20 gauge EQ is 18 mil steel and standard 20 gauge is 30 mil for drywall studs or 33 mil for structural studs. If a spec states a minimum thickness such as 30 mil, an EQ stud does not meet it.
Order it
Stock lengths or cut to your exact size, priced before you send the order. Not sure what the job takes? Send the plans and we will send back a material list.
Sources
Figures are the manufacturers’ published values and the catalog’s own data. The project drawings, specifications and the engineer of record govern what a job requires.