Resources
Free Tools for Contractors.
Submittals, Calculators and Guides.
Build a product-data submittal, work out the material for a wall or a ceiling, and look up gauges, part numbers and weights. Each tool runs here in your browser and none of them needs an account.
Submittal builder
Build a SubmittalFrom Our Catalog.
Pick the products on the job, choose the sizes and download one PDF: a cover for your project, the manufacturer's data sheet for each product with your part number marked, and the safety data sheets at the back.
- Pick products from the whole catalog, or start from a typical package
- Choose the size and the part number is marked on the manufacturer's sheet
- Your project, general contractor and architect on the cover, with review boxes
- Save it in your account, open it again, or request a quote from it
You also get a submittal with every quote and order, on its page in your account.


Material calculators
Count the Materialfor a Wall, a Room or a Job.
Enter the sizes off the plans and get the studs, track, board, compound, grid and insulation, with the working shown and the wall drawn to scale.
- Studs and track, drywall, compound and tape, ceilings, insulation, cut lists
- Every answer shows how it was worked out, and every rule can be changed
- Your wall, your board and your ceiling drawn to scale
- One material list for the job, priced in your order or sent to a submittal
- Metal studs and trackWall length, height and spacing in. Studs, track, deflection track, screws and fasteners out.
- Drywall sheetsWall and ceiling area in. Sheets out, and the same wall compared in 8, 10 and 12 foot board.
- Mud, tape and screwsBoard area and finish level in. Joint compound, tape, screws, corner bead and sealant out.
- Ceiling grid and tileRoom sizes in. Main runners, cross tees, wall angle, hanger wire and panels out.
- Drywall ceilingRoom size in. Drywall grid or channel and furring, hanger wire, board and screws out.
- InsulationWall length and height in. Square feet of cavity and bags of batts out.
- Cut listYour cut list in. Sticks to buy and scrap left over, for each stock length.
- Whole job, room by roomA row for each room in. Board, finishing, framing and ceiling for the whole job out.
Guides
Short Answers,With the Tables Behind Them.
Gauges, part numbers, weights and board types. Each guide answers one question and shows the figures it rests on.
- Metal Stud Gauge Chart: Gauge, Mils and Steel ThicknessMetal studs are ordered by mils (thousandths of an inch), not gauge. 25 gauge is 18 mil, 20 gauge is 30 mil for drywall studs and 33 mil for structural studs, 18 gauge is 43 mil, 16 gauge is 54 mil, 14 gauge is 68 mil and 12 gauge is 97 mil. A lower gauge number is thicker steel.Read the guide
- How to Read a Metal Stud Part NumberA metal stud part number reads web depth, shape, flange width, then thickness. 362S162-33 is a 3-5/8 inch web (362), stud (S), 1-5/8 inch flange (162), 33 mil steel. Depths and flanges are in hundredths of an inch and thickness is in mils.Read the guide
- EQ Studs Explained: 25 Gauge EQ and 20 Gauge EQAn EQ stud is a drywall stud made from thinner, higher-strength steel with a stiffened shape, built to match the wall heights of a standard gauge. 25 gauge EQ is 15 mil instead of 18 mil, and 20 gauge EQ is 18 mil instead of 30 mil. EQ studs are for interior non-load-bearing walls only.Read the guide
- Metal Stud Weight Per Foot ChartA 3-5/8 inch drywall stud weighs 0.35 lb per foot in 25 gauge EQ (15 mil) and 0.68 lb per foot in 20 gauge (30 mil). A 3-5/8 inch structural stud with a 1-5/8 inch flange weighs 0.89 lb per foot in 33 mil, and a 6 inch structural stud weighs 1.52 lb per foot in 43 mil and 1.89 in 54 mil.Read the guide
- Type X vs. Type C DrywallType X is fire-rated gypsum board defined by ASTM C1396: 5/8 inch Type X gives at least a 1-hour rating in the standard test wall. Type C is an improved Type X with more glass fiber and additives that hold the core together longer in a fire. Use the type the fire-rated design names; Type C is most often required in ceilings and floor-ceiling assemblies.Read the guide
- How to Estimate Suspended Ceiling Grid for a RoomMain runners go 4 ft apart, 4 ft cross tees go between them every 2 ft, and a 2x2 ceiling adds a 2 ft cross tee in each opening. Wall angle runs the full perimeter and a hanger wire holds each main every 4 ft. A 20 x 30 ft room in 2x2 tile takes 11 mains, 77 four-foot tees, 83 two-foot tees, 10 pieces of wall angle, 32 hanger wires and 165 tiles with 10% waste.Read the guide
A Full Set of Plans? We Take It Off for You.
Upload the plans, specifications, addenda and bid forms. We measure every wall and ceiling and send back the takeoff, an Excel bid sheet and a material quote.