Acudor · Roof Hatches & Smoke Vents

RHG Service Stair Access

Quote required

Service Stair Access Galvanized

Acudor Galvanized Service Stair Access Roof Hatches are designed to provide convenient, economical access to the roof of a building.

Cover: Double-skin construction (“in box type design”) with 1" Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 20 gauge aluminum inside liner.
Curb: 14 gauge galvanized steel with 1" thick Polyiso (R-6) insulation with Fiberglass liner at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Hinge: Heavy duty galvanized steel pintle hinges with 3/8" SS pin
Opening: Gas spring operators allow cover to open and close with ease. Stainless Steel inside pull handle allows for easy control when closing cover.
Door Latch: Self latching, Stainless Steel outside T handle with inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Finish: Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint.

Description, photography, drawings and documents as published by Acudor. Their product page ↗

RHG Standard Sizes

1 size. Every figure is Acudor's published data.

	Model	Curb ID W&L · inches (mm)	Weight per Hatch · lbs. (kg.)
	G38104	30 x 96 (762 x 2438)	335 (152.3)

(other sizes available)
For detailed specifications see submittal sheet

Acudor builds other sizes to order — the table is their standard range, not their limit. Tell the desk the opening you have and we'll quote the door for it.

Product Highlights

Stainless Steel Hardware standard on all hatches
1" Polyiso (R-6) insulation standard on all hatches
EPDM foam weather/draft seal gaskets provides weather tight construction
Supports 40lbs./sq. ft. live load

Documents

6 documents, served straight from Acudor so you always get the current revision.

Ask About This Product

Answered from Acudor's own documents — the 2 sheets listed above — with the source and page behind every line.

AI · cites its sources